Industrial CRT monitor repair, RGB Monitor repair, MDA Monitor repair, CGA Monitor repair, Ega Monitor repair, Mda monitor repair.
Our RGB CGA EGA MDA TO VGA CONVERTER will help you to fix it out very easily.
HC1011 (RGB CGA EGA MDA RGBHV TO VGA CONVERTER)Inctroduction
HC1011 (RGB CGA EGA MDA RGBHV TO VGA)supports RGB CGA EGA MDA RGBHV signal converting to VGA signal, which can be fed to
monitor ,CRT monitor ,projector, TV,and many other devices, replacing your old display
with ease. It has clear graph,stable performance,is widely used in digital control CNC
monitor ,industrial monitor ,imported DCS monitor , analytical device, navigation monitor ,
medical device , airport system, railway system, financial device , special monitor , game
arcade, entertainment monitor. HC1011 (RGB CGA EGA MDA RGBHV TO VGA) is highly adaptive to different parameters. It is
the best old monitor replacement solution nowadays.
Specifications:
Supported signal source:RGB SOG(green Sync
RGB SOB(blue Sync
RGB SOR(red Sync
RGBS (composite Sync
RGBHV ( discrete Sync
1, support 12k to 40k H video signal ,automatical y recognized, no limitation on V value.
2, support RGB & YPbPr video format.
3, support interlace scan & progressive scan.
4, support vertical resolution from 200 lines to 600 lines,automatical y recognized.
5, Support any kind of horizontal freq,automatical y recognized.6, support discrete Sync
signal , composite Sync signal or Sync signal composite on video signal, automatical y
recognized.
7, output 800*600 V freq 60Hz standard VGA signal or customized resolution.
8,output support: al kinds of LCD display ,CRT monitor ,LCD TV and so on.
Application case:
digital control monitor & industrial monitor repalcement. It has been
widely used in industrial ,business , analytical device industrial monitor
products. It is used to replace old devices with special CRT monitor
components. This product is widely used, including: Automatic Control
System for industry,DCS(distributed control system) & special instrument
system, digital control CNC. Soldering robots. Financial ATM device. PCB
board manufacturing device. Airport, Safety X-ray checking device.
HC1011 (RGB CGA EGA MDA RGBHV TO VGA CONVERTER) can convert video signal from RGB signal
(4pin,9pin,7pin,including B/W and so on) to VGA standard signal, which
can be fed into LCD monitor ,CRT monitor ,projector, LCD TV and so on.
Replace old display system. It has clear graphs , stable performance
and is widely used in many fields.
1956, FANUC company stared. They make digital control system & industrial robots.
They have made more than 40 products since 1960s. The digital control equipments they
are producing are F0,F10/F11/F12,F15,F16,F18 series. F00/F100/F110/F120/F150 series
add MMC on F0/F10/F12/F15, that is CNC,PMC,MMC three-in-one CNC. FANUC digital
control systems are famous for their functionalities, reliabilities.
Most of FANUC monitor on FANUC digital control CNC from 1980 to 1990 are very old
and dying. However, there is no support for these old CRT monitors. In order to make
these FANUC CNC to work for a longer time, we must replace these monitors with new
LCD monitors. The following are examples of replacing old FANUC monitor with the help
of our HC1011(RGB CGA EGA MDA RGBHV TO VGA CONVERTER).
CASE1. FANUC O-M original monitor (blinks after long time working):
FANUC O-M digital control CNC video signal connection:
FANUC O-M digital control CNC video signal connection with HC1011(RGB CGA EGA MDA RGBHV TO VGA CONVERTER) after
modification:
After the connect with source signal, you can just usd a general vga monitor to connect with HC1011(RGB CGA EGA MDA RGBHV TO VGA CONVERTER), the appearance as follows
CASE2. Repair a NUM 760 Monitor
NUM monitor
NUM company has been doing their business for a long time. For recent 30 years, NUM
machines has been used in many industrial fields.
NUM760
Earlier NUM machines display systems are almost dead. The company never support
new monitor nor replacement device; Therefore, we need to replace NUM monitor with
some standard monitor. The following is an introduction to NUM760 monitor
replacement.
NUM CRT
Replacement of NUM signal
source board:
NUM
HC1011(RGB CGA EGA MDA RGBHV TO VGA CONVERTER)
This NUM signal source board has good quality. signal connector is on the left top of that
board, signal wire is black, includes: H( red cable , V( yellow cable , video ( blue cable ,
GND (yel ow green & white cable
We use HC1011(RGB CGA EGA MDA RGBHV TO VGA CONVERTER), , converting NUM760 signal to standard VGA signal .
HC1011(RGB CGA EGA MDA RGBHV TO VGA CONVERTER), signal input definition:
This NUM monitor wire connections:
NUM signal wire( red wire HC1011(RGB CGA EGA MDA RGBHV TO VGA CONVERTER) H( pin 8)
NUM signal wire( yel ow wire HC1011(RGB CGA EGA MDA RGBHV TO VGA CONVERTER), V( pin 9)
NUM signal wire( blue wire HC1011(RGB CGA EGA MDA RGBHV TO VGA CONVERTER), R,G,B pin (connect to pin 3,4,5)
NUM signal wire(yel ow green wire & white wire HC1011(RGB CGA EGA MDA RGBHV TO VGA CONVERTER), GND ( pin 1,2
one of them), no other wire is needed.
Connect to the new monitor , using HC1011(RGB CGA EGA MDA RGBHV TO VGA CONVERTER), set to RGBHV, done!
NUM760
The result of the replacement is really stable. It solved the problem caused by aging
NUM monitor.
HC1011(RGB CGA EGA MDA RGBHV TO VGA CONVERTER),brief introduction :
HC1011(RGB CGA EGA MDA RGBHV TO VGA CONVERTER), industrial , digital control display signal converter can make NUM signal
source devices’ non standard signal source convert to VGA standard signal ,directly
used on LCD monitor ,CRT monitor . HC1011(RGB CGA EGA MDA RGBHV TO VGA CONVERTER), can perfectly replace your old display with
stable output. It is widely used in many NUM digital control device replacement.
HC1011(RGB CGA EGA MDA RGBHV TO VGA CONVERTER), signal supported formatMDA,CGA,EGA,VGA, monochrome, B/W signals
etc. :
RGBSOG(green Sync
RGBSOB(blue Sync
RGBSOR(red Sync
RGBS (composite Sync
RGBHV ( discrete Sync
********************Input********************
Signals:MDA,CGA,EGA,RGB,RGB Sog,RGBS,RGBHV,YPbPr
Interface: 5BNC, 9pin,3pin,6pin,14pin,15pin,20pin,25pin
Horizontal Frequency Rate(H):12kHz to 40kHz automatically recognized
********************Output********************
Supports D-15pin standard VGA/SVGA,Resolution:800*600/60HZ, 640*480/60hz
Interface: D-Sub 15 PIN standard VGA port
********************Power********************
DC 12V 1.0A
Note:
1.YPbPr = YUV
2.Input Horizontal Frequency Rate 12kHz to 40kHz automatically recognized.
3.Support RGB/RGBSOG/RGBHV CGA/EGA/MDA and YPbPr
4.Support Interlaced Scanning and Line by Line Scanning.
5.Support Vertical Resolution from line200 to line 600 automatically recognized.
6.Support variable Horizontal Resolution automatically recognized.
7.Support RGBHV (separate sync) ,RGBS (composite sync), automatically recognized
8.Output resolution: 800*600/60Hz standard VGA or custom-resolution.
CNC Monitor Replacement Solution
a61l-0001-0072
a61l-0001-0074
a61l-0001-0076
a61l-0001-0077
a61l-0001-0078
a61l-0001-0079
a61l-0001-0086
a61l-0001-0087
a61l-0001-0090
a61l-0001-0092
a61l-0001-0093
a61l-0001-0094
a61l-0001-0095
a61l-0001-0096
c-3240
c-3470
c-5470
8dsp40
26s14o19l
cd1472d1m
cdt-14148b
mdt1283-b
mdt925ps
mdt962b
me12-pdb
hm12-pdb
mitsubishi monitors
c-3240lp
c3470
c-5470ns
cdt14111b
cdt14148b
mdt1283b-2a
mdt1216
mdt947
mdt947b
mdt947b-1a
mdt947b-2b
mdt962b-1a
siemens monitor
6fc3988-7af01
6fc4600-0ar04
6fc4600-0ar50
6fc5103-0ab01
qdm-9wd-110
qdm-9wd-120
qdm-9wd-121
sc-1200
sm0901
576744ta
576745ta
hitachi monitors
c14c-1472df
c14c-1472d1f
c-5470ye
cd1472d1m
cd1472d1m-2
cdt14111b
cdt14111b-8a
tx1424ad
c14c-1472dfa
tx1425b
tx1450a
tx1450ae
toshiba monitors Index
d9cm-01a
d9mm-11a
d9mr-10a
d9mr-51b
d14cm-01a
d14cm-06a
d15cm-04a
d15cm-06a
ge monitors
44a717111
44a719977
44a719978
44a719979
matsushita monitors
kf-m7099h
tr-9dd1b
tr-9dk1
tr-9dk1a
tr-9dk1b
tr-9dkyc
tr-9k1b
tx-901ab
tr-120s9c
tx-1204
tx-1204ac
tx-1208aa
tx-1404
tx-1404ab
tx-1424
tx-1424ab
tx-1424ad
tx-1425b
tx-1450ab
tx-1450aba
tx-1450ab5
tx-1450ae special
heidenhain Index
bc110b
bc120
be211
be211b
be411
tatung monitors
cd14
cd14jbs
cd14jds
magnetek monitor
1051091000
14531400102
14531400107
576744ta
576745ta
579417ta
Other Applications: SSMT monitors, injection molding machine monitor, CNC monitors, wire cutting display, EGA monitor, CGA display, RGB monitor, SMT liquid crystal display, LCD / CRT. Injection molding machine LCD LCD / CRT monitor, CNC liquid crystal display LCD / CRT, LCD Wire LCD / CRT,EGA liquid crystal display LCD / CRT, CGA LCD LCD / CRT, RGB Liquid Crystal Display LCD / CRT. Industrial LCD monitors, industrial LCD / CRT, Industrial LCD monitors, industrial LCD / CRT.Automatic patch panel display, B super-display monitors. CNC monitors, FANUC (FANUC) displays, Mitsubishi monitor, balance machine monitor, thickness monitor, GPS monitors, car LCD monitor, printer monitor, 9-pin monitor, LCD Bowling, AMF LCD, Brunswick LCD monitors, GPS LCDs, Bowling Scoreboard, bowling counter, bowling LCD screen, RGB switch VGA, RGBS switch VGA, RGBHV switch VGA, CGA transfer VGA, EGA VGA converter switch, RGBS converter, RGB converter, power plant equipment displays, industrial control equipment, displays, industrial displays, DCS display Shanghai million have some of the key words: liquid crystal display CNC machine tools, used to replace domestic early from Japan, Germany, the United States, Switzerland, the Netherlands, South Korea and other countries, the original imported CNC lathes, CNC milling, CNC grinding machines, CNC planer, NC punching, CNC wire cutting, CNC drilling, CNC laser cutting, CNC welding machines or large CNC machining center used in a large number of CRT (cathode ray tube) monitors, the product applied to all early use of CRT monitors for CNC system, typically Japan FANUC (FANUC) company FANUC6, FANUC10, 11,16,18,20,0,16 T, 16M CNC systems such as the display; German SIEMENS (Siemens) company SIEMENS8,810,820,8403,3 T, etc.CNC system; Japan MAZAK (Mazak)’s MAZATROL, MITSUBISHI-QUICKTURU, MAZAK-MPLUS, TPLUS and other systems; Japan OKUMA (Okuma) companies OSP5000, OSP3000, OSP8000, OSP5020 other CNC system; German HEIDENHAIN (Heidenhain) Company TNC407, 410,415,406,425,426,430, etc. CNC system, the Japanese HITACHI-SEIKI (Hitachi Seiki) Company, the Netherlands PHILIPS (Philips) companies, brand CNC system, direct installation process is simple, good effect. FANUC Fanuc, OKUMA Okuma Ao Kema, MITSUBISHI MITSUBISHI, HITACHI Hitachi, SIEMENS Siemens, MAZAK MAZAK, TOSHIBA TOSHIBA, MATSU****A Panasonic, PHILIPS Philips and other brands.
Reference:
- Universal LCD Upgrade replacement sulotions
- Universal 8.4inch LCD Upgrade (instead of 8inch, 9inch CRTs) CNC Monitor
- Universal 10.4inch LCD Upgrade (instead of 10.4inch, 12inch CRTs) CNC Monitor
- Universal 12.1inch LCD Upgrade (instead of 12inch, 14inch CRTs) CNC Monitor
© 2011 Hmwtech Co.,ltd. All Rights Reserved. Any enquiries, please email the webmaster at info@harmonywolrd.com.
english | ä¸æ–‡ | العربية | Française | Deutsch | Italiano | 日本ã®è¨€èªž | í•œêµì˜ | Português | руÑÑкий | Español | Türk |
Home | Industrial Monitor | PLC | AD Boards | TFT-LCD Modules | Contact Us | Sitemap |
xVGA Converter | 7 inch | 8-9 inch | 10-12 inch | 14-15 inch | 17 inch | 19 inch | By brands |
Powered by Hmwtech Co.,ltd |